Unit installation

24
Table 2.6 RS232 Baud Rate Settings.
Printer Interface Module
The Printer Interface module allows the Galaxy to be connected to a serial
printer and the contents of the event log and the programming details of the
system to be printed. The module is available with either a:
• 25 way sub D type RS232 serial connector (part number A161), or,
• 6 pin DIN plug (part number A134).
The printer interface module can be connected to the Galaxy system at S1 on
the control panel.
The printer must have a serial interface port. The printer protocol must be set
up as outlined in Table 2.7 Printer Settings.
Table 2.7 Printer Settings.
duaB
etaR
gnitteShctiwSPID
678
003ffOffOffO
006ffOffOnO
0021ffOnOffO
0042ffOnOnO
0084nOffOffO
0069nOffOnO
00291nOnOffO
00483nOnOnO
locotorPgnitteS
tiBtratS1
tiBpotS1
htgneLdroWstiBataD8
ytiraPenoN
etaRduaB0021
Printer Interface Module