Unit installation

98
6 Home 1 Triggs
The Home 1 Trigs option is used to assign the triggers for menu option 12.12
Call Home 1. The available triggers are outlined in Table 6.6 Home 1 and Home 2
Triggers. By default only Trigger 3 Intruder is enabled.
On selecting the Home 1 Triggs the first trigger (Fire) is displayed. The other
triggers can be viewed using the A or B keys. To toggle the enable status of
each trigger press the # key.
Press the ent key to accept the programming or esc to cancel.
7 Home 2 Triggs
The Home 2 Trigs option is used to assign the triggers for menu option 12.13
Call Home 2. The available triggers are outlined in Table 6.6 Home 1 and Home 2
Triggers. By default only Trigger 3 Intruder is enabled.
The programming for Home 2 Triggs is the same as for Home 1 Triggs.
Table 6.5 STU Triggers. Table 6.6 Home 1 and Home 2 Triggers.
13 = Communications 2 (cont’d)
.oNreggirTepyTreggirT
00desUtoN
10eriF
20AP
30redurtnI
40teS
50slleB
60ebortS
70CDhctiwS
80ytiruceS
90mrifnoC
01nroH
11lacideM
21liaFCA
31AkniL
41BkniL
51woLttaB
61repmaT
71timO
.oNreggirTepyTreggirT
1eriF
2AP
3redurtnI
4tesnU/teS
5repmaT
6timO
7goL/kniL
8tesnU/teStraP