Unit installation

91
If Call Back is selected, then access to the Galaxy 16 plus is denied
unless the call back option in Galaxy Gold is used to initiate the
connection.
11 Remote Telephone
This is the telephone number that the Galaxy 16 plus calls when requested to
initiate one of the call back access options.
12 – 15 Home Numbers
These menu options are used to provide multiple dialling options, or as a
backup to the main telephone number(s) and format (menu options 12.2 Tel No.
1 to 12.4 Format). These options also allow multiple formats to be used with
the Galaxy 16 plus. There are four Home Telephone number options; as many of
these as are required can be used.
The main telephone numbers have the highest priority. Once the main tel-
ephone number(s)/format have finished dialling, or, if the main telephone
numbers are unable to dial successfully, that is, a Fail To Communicate is
recorded in the Event Log, then the Home telephone numbers will be tried.
The Home telephone numbers may also be tried if the programmed Home
Triggers differ from the main format triggers, for example, if the main format is
DTMF and the Home format is SIA and one of the selected Home triggers is
Part Set/Unset the digi will not dial this out on the main format as there is no
DTMF equivalent, so the Home Numbers will dial this information.
If there is a failure to dial to any of the Home telephone numbers then the main
format and numbers are checked; depending on which triggers have been
programmed for the main format there may be alarms pending. If alarms are
pending and the panel has tried previously to dial and was unsuccessful, the
number of attempts is reset to 0 and the main format number is redialled. When
the main format number has been dialled successfully then the Home numbers
will be retried. If the main format has no alarms pending then the Home numbers
are retried.
12 Home1–SIA
To enable the SIA Home number option enter a telephone number into the
menu option. The programming of the telephone number is identical to the
programming of the main telephone numbers, see 12 Communications 1; 02
Telephone Number 1
.
The triggers for Home1 are programmed from menu option 13 Communica-
tions 2; 6 Home1 Triggs.
13 Home2–Microtech
The operation of Home2–Microtech is the same as for Home1–SIA with the
exception of the different transmission format.
To enable the Home2–Microtech triggers option enter a telephone number into
this menu option.
12 = Communications 1 (cont’d)