Specifications

October 2012 © British Telecommunications plc 2011
Page 27
Web console
To access the web console a PC needs to be connected to the Ethernet port. A cross over
Ethernet cable maybe required. Check for the green LED to the left of the Ethernet connector,
blinking with the passing of data. This ensures the correct connectivity.
Configure the PC to have a static IP address within the range 192.168.222.xxx.
i.e. set the PC to have the following static details:-
IP address = 192.168.222.10
Subnet mask = 255.255.255.0
Gateway = 192.168.222.222.
 Access the button config menu by holding M for 3 seconds.
 Repeatedly Press M until t1 is displayed.
 Press S to access the submenu
 Press S to toggle the setting to 1 (web console enabled =1)
 Press M to return to the main menu.
This enables the web console access, and gives the unit a temporary static IP address of
192.168.222.222 for the duration that t1 is enabled. Open the web browser, i.e. internet
explorer, and surf to http://192.168.222.222.
Web console Log in screen
Figure 15 - Web console Login Screen