Installation manual

Windsor Installation Manual - Issue C
-
58
-
Printer Port
A PC may be connected directly to the printer port if the panel is fitted with version 3.00 or
later software.
If the main PCB printer connection (CON 11) is being used refer to the PCB connections
section of this manual.
If the panel printer cable assembly is being used the 7 pin DIN connections are shown below.
DIN Connector Function
1 RX
2 0v
3 TX
4 CTS
5 RTS
6
7
6
1
4
2
7
3
5
In both cases the cable connection to the PC must have crossed connections (RTS to CTS
and RX to TX).