Installation manual

Windsor Installation Manual - Issue C
-
33
-
HS Concentrator
The HS concentrator is functionally equivalent to the existing “Vigil” concentrator and may be
used in a Windsor 500 or 700 system. The maximum concentrator address is 32 which allows
systems of up to 256 circuits to be configured. On a Windsor 500 the maximum number of
circuits is 128.
The HS concentrator PCB is supplied either in a Windsor 500 concentrator plastic case (white
plastic with screw on lid) or in a metal case. The HS spare PCB may also be fitted into a Vigil
case.
HS Concentrator
PCB Layout
Day Input
Day link
Fused DC
outputs
Daughter
board
connection
Address DIL
switch or links
HS Concentrator
Address Selection
The HS concentrator address is set using either a DIL switch or PCB links. The address table
shows the DIL switch positions and the Windsor addresses.
Windsor 500 Address Address Links
5 4 3 2 1
Concentrator 1
Concentrator 2
Concentrator 3
Concentrator 4
Concentrator 5
Concentrator 6
Concentrator 7
Concentrator 8
Concentrator 9
Concentrator 10
Concentrator 11
Concentrator 12
Concentrator 13
Concentrator 14
Concentrator 15
Concentrator 16
= link fitted, = link not fitted