Installation manual

Windsor 500 Installation Manual - Issue C
-
-
Inova Cardpoint
Commands
Command Suffix Description LED Indication
Swipe
Master Card
None Enter learn mode Red On Green On
Slow alternating
# abcd # None Enter Programming mode in
order to reset the reader (abcd is
one of the two master reset
codes)
Red quick flash Green Off
#00# None Exit Learn Mode/Exit
Programming Mode
Red On Green Off
#14# 1# Set door release time to 1
second
Red Off Green On (1 sec)
2# Set door release time to 5
seconds (default)
Red Off Green On (1sec)
3# Set door release time to 5
seconds
Red Off Green On (1sec)
4# Set door release time to 5
seconds
Red Off Green On (1sec)
#30# nnnnn# Add access card no. nnnnn Red Off Green On (1sec)
#31# aaaaa#ii# Add alarm card no. aaaaa alarm
panel identification no. (APIN).
(1.99)
Red Off Green On (1sec)
#33# ddddd# Delete access or alarm card no.
ddddd
Red Off Green On (1sec)
#34# nnnnn#
mmmmm#
Add block of access cards nnnnn
to mmmmm
Red Off Green On (1sec)
#37# ddddd#
eeeee#
Delete block of access
cards from no. ddddd to eeeee
Red Off Green On (1sec)
#41# 2# Lock Door
Default
Red Off Green On (1sec)
3# Unlock door and maintain
unlocked
Red Off Green On (1sec)
4# Unlock door momentarily Red Off Green On (1sec)
5# Card + PIN mode Red Off Green On (1sec)
6# Card Only mode (default) Red Off Green On (1sec)
#58# 1# Set entry time to 15 seconds Red Off Green On (1sec)
2# Set entry time to 20 seconds Red Off Green On (1sec)
3# Set entry time to 30 seconds Red Off Green On (1sec)
4# Set entry time to 45 seconds Red Off Green On (1sec)
5# Set entry time to 60 seconds Red Off Green On (1sec)
#59# 1# Access controller mounted inside
controlled area as a
reader (default)
Red Off Green On (1sec)
2# Access controller mounted
outside controlled area as a
request-to-enter reader
Red Off Green On (1sec)
#61# 0# Set alarm relay to alarm shunt
(default)
Red Off Green On (1sec)
1# Set alarm relay to alarm signal Red Off Green On (1sec)
2# Normal access control mode
(default)
Red Off Green On (1sec)
3# Unlock with Unset mode Red Off Green On (1sec)
#98# None Delete all card numbers and
reset to factory settings
Red Off Green On (1sec)