Installation manual

Windsor 500 Installation Manual - Issue C
-
20
-
User Interfaces
Keypad
The Windsor keypad has a 2 line by 16 character backlit LCD, a 15 button backlit keypad, 8
status LEDs and an electronic key socket as standard. All keypads are connected to Windsor
on 4 wire UI bus.
2 x 16 character
LCD backlit
display
Status LEDs
15 button backlit
keypad
Electronic key
socket
Keypads
Installation
The keypad should be fixed to the wall through using the fixing holes provided. If the off the
wall tamper is being used then the tamper knockout should be removed prior to mounting the
rear case.
Case fixing
holes
Off the wall
tamper
Trunking points
Conduit point
Guardall
12:00