User guide

30
Press buttons in order shown
Wait until all messages have been
played. Voice says ‘End of messages.’
The display shows
END OF MESS and 3
options
DEL
<<
STOP .
DEL Press DEL. The display shows
DELETE ALL .
YES Select YES.
Voice says ‘All messages deleted’ and the
display shows
DELETED before returning
to standby.
The message waiting symbol
disappears.
If you do not want to delete your
messages:
Either
STOP Press STOP during the END OF MESS
screen.
Or
NO Press NO during the DELETE ALL screen.
In both cases the display will return to
standby.
To delete all messages at once
PLEASE NOTE
Any message not deleted will automatically
be saved and stored.
The answering machine must be
switched on and be set to
ANSWER AND
RECORD
(see page 23).
Incoming calls will cause the handset
display to show
CALL .
OK After the answering machine has
answered the call, the display shows
CALL SCREEN . Pressing OK allows the
listener to hear the call but the
microphone is muted.
BACK If you wish to stop listening, press BACK.
The handset returns to standby and the
message is recorded in the usual way.
If you wish to take the call, press the
TALK button. The display shows SEC
TRANS
. You can now talk to the caller.
The portion of the message left before
you pressed the
TALK button is
recorded and tagged with day and time.
The message symbol appears.
To Call Screen while the handset is on
the charger, handset display shows
CALL .
OK Press the OK button before picking up
the handset.
ANSWERING MACHINE
To listen to a caller leaving a
message (Call Screening)