User guide

28
Press buttons in order shown
At standby press
OPTIONS until the
display shows
ANS MACHINE .
OK Select OK. The display briefly shows
MAKING LINK then shows ANSWER .
Press
OPTIONS until display shows
ANS SET UP .
OK Press OK. Display shows ANSWER MODE .
Press
OPTIONS until the display reads
REMOTE alternating with ACCESS ON .
CHANGE Press CHANGE. Display shows
ACCESS ON .
Press the
OPTIONS button to switch
between on and off. At each option
voice says ‘Remote access on’ or ‘off’.
SAVE Select the option you want using SAVE.
Display returns to
REMOTE ACCESS ON
or OFF , confirming the setting that has
been selected.
BACK Press and hold BACK to return to
standby.
Options
Options
Options
Options
To turn remote access on and off
There are 3 speaker volume settings:
High, Low or Off.
Press the
OPTIONS button until the
display shows
ANS MACHINE .
OK Select OK. Display briefly shows
MAKING LINK .
Press the
OPTIONS button until the
display shows
ANS SET UP .
OK Press OK. Display shows ANSWER MODE .
Press the
OPTIONS button until the
display shows
BASE SPEAKER alternating
with
VOLUME HIGH , LOW or OFF .
CHANGE Select CHANGE. Display shows VOLUME
HI LOW
or OFF .
Press the
OPTIONS button to switch
between the settings. When
HIGH is
shown there is a loud beep, a softer one
for
LOW and silence for OFF .
SAVE Press SAVE to select the one you want.
The display returns to
BASE SPEAKER
and shows the new setting.
BACK Press and hold BACK to return to
standby.
Options
Options
Options
Options
Setting the base unit speaker volume
ANSWERING MACHINE