User guide

27
At standby, press OPTIONS until the
display shows
ANS MACHINE .
OK Select OK. The display briefly shows
MAKING LINK then shows ANSWER .
Press
OPTIONS until the display shows
ANS SET UP .
OK Press OK. The display shows ANSWER
MODE
.
Press the
OPTIONS button until the
display reads
MESSGE ALERT flashing
alternately with either
ON or OFF ,
depending on the current setting.
CHANGE Press CHANGE. Display shows OFF or
ON . The setting shown is the current
setting. If this is what you want, select
SAVE SAVE.
If you wish to change the setting, press
the
OPTIONS button and the setting
will change. Voice says ‘Message alert
on/off’. The display then returns to
MESSGE ALERT , alternating with the
new setting.
BACK Press and hold BACK to return to
standby.
Options
Options
Options
Options
To turn the message alert beeps
on and off
At standby press OPTIONS until the
display shows
ANS MACHINE .
OK Select OK. The display briefly shows
MAKING LINK then shows ANSWER .
Press
OPTIONS until display shows
ANS SET UP .
OK Press OK. Display shows ANSWER MODE .
Press
OPTIONS until the display shows
SECURITY CODE and the current three
digit code. (Default code is
000 .)
CHANGE Press CHANGE. Display repeats the
three digit code with the first digit
flashing. If you wish to retain the
SAVE existing code, select SAVE.
If not, enter a new number, then press
SAVE SAVE. Voice says ‘Security code setting
XXX’
and the display returns to
SECURITY
CODE
showing the new setting.
BACK Wait 20 seconds or press and hold BACK
to return to standby.
Options
Options
Options
To set your remote access security
code from your handset
ANSWERING MACHINE