User guide

26
SAVE Use the handset’s keypad to enter the
correct time and press
SAVE. Display
shows (eg. 01.45)
MON 01.45PM and the
options:
AM or PM . Voice says “Press the
AM or PM button, then press SAVE to
confirm”.
SAVE Select AM or PM and press SAVE.
Voice confirms day and time set and the
display returns to
ANSWER MODE .
MAINS POWER FAILURE
If the mains power fails, your Outgoing
Messages and any Incoming Messages or
Memos that have been recorded will be saved.
However, if the mains power fails for more
than about 1 second, you will need to reset the
time and day announcement.
Press buttons in order shown
At standby press
OPTIONS until the
display shows
ANS MACHINE .
OK Select OK. The display briefly shows
MAKING LINK then shows ANSWER .
Press
OPTIONS until display shows
ANS SET UP .
OK Press OK. Display shows ANSWER MODE .
Press
OPTIONS until the display shows
ANSWER DELAY and X RINGS .
The number of rings shown is the
current setting.
CHANGE Select CHANGE. Display shows the
current setting again:
X RINGS .
SAVE Select SAVE to confirm setting shown or
keep pressing the
OPTIONS button to
scroll through the different settings.
As each new number of rings appears
voice says ‘Answer delay X rings’ or
‘Answer delay Timesaver’. Make your
OK selection by pressing OK. Display
immediately returns to
ANSWER DELAY ,
showing the new setting.
BACK Wait 20 seconds or press or hold BACK
to return to standby.
Options
Options
Options
Options
To set the number of rings before
your Quartet 2015 answers the call
ANSWERING MACHINE