User guide

Help 29
C I want to connect my computer using the Ethernet cable
1 Check that your computer has a spare Ethernet port. This is a small socket on
the back or side of your computer and is usually marked LAN, Ethernet,
or
. If you aren’t sure, check the information supplied with your computer.
If you don’t have an Ethernet port, see page 33.
2 Plug one end of the Ethernet cable (yellow ends) into one of your Hub’s
Ethernet sockets.
3 Plug the other end of the Ethernet cable into your computer’s Ethernet socket.
4 Open your web browser – you should be on the internet. If you can’t connect to
the internet, please restart your computer and try these steps again – or follow
any related on-screen troubleshooting instructions.
Find Handset
Reset to
Defaults
Wireless
Association
Restart
Find Handset
Reset to
Defaults
Wireless
Association
Restart
Find Handset
Reset to
Defaults
Wireless
Association
Restart
Learn about… Help Your BT Home Hub