Service manual

Doc. No. DOC- 00026415 REV.
Issued Date 2007/02/12
.
Revised Date N/A
A01
Doc. Title
VOX Service Manual
Page
44 of
70
HTC CONFIDENTIAL
宏
宏宏
宏達國際電子股份有限公司
達國際電子股份有限公司達國際電子股份有限公司
達國際電子股份有限公司
High Tech Computer, Corp.
High Tech Computer, Corp.High Tech Computer, Corp.
High Tech Computer, Corp.
5. C OSMETIC I NSPECTION C RITERIA
5.1 Definition of Cosmetic Standard

Standard is for refurbishment inspection.
5.2 Visual Inspection Requirements

Examination of the device shall be made with workbench light turned on.

Ambient illumination is to be 500-1000 Lux.

The inspector shall examine the device at a distance of 30cm ±45degrees.

Inspection time: 2 seconds per surface.
5.3 Definitions of Inspection Defects and Areas

Scratch
：
A linear cut that penetrated beyond the surface of the material / a scratch can be felt by
running your finger over it.

Dot / Dent
：
A recessed spot or void in the surface of the material.

Lint
：
A linear foreign object beyond the surface of the LCD.

D: Diameter/ L: Length/ W: Width/ N: Number of defects/ S: Distance of dot to dot.

Area A: The front side of main unit.

Area B: Alphabetic keyboard area.

Area C: Five sides of device (Top, Bottom, Left, Right and Back view).

Area D: Internal area covered by battery cover and internal side of battery cover.
Area A Area B Area C Area D