User guide

3 Go!
Set time and date
At the base, press and hold . Current hour is announced and displayed.
Press or to set the hour, then to conrm.
Press
or to set the minute, then to conrm.
Press
or to select A for AM or P for PM, then to conrm.
Press
or to set the day.
Press to conrm. Full time and day will be announced.
You will need to set the handset time separately using the handset menu,
see the full user guide online at www.bt.com/producthelp
Making calls
Press then dial the phone number. Press to end the call.
Answering calls
If you have subscribed to Caller Display, the caller’s details will be displayed before you
answer (see below and also the full user guide online at www.bt.com/producthelp
for details).
Lift the handset from the base or charger to answer incoming calls. If the handset is
not on the base or charger, press
.
Handsfree
Press
during a call to switch between earpiece and loudspeaker.
Secrecy
During a call, press
. MUTE is displayed and your caller cannot hear you.
Press to resume your call.
Redial
Press
, then scroll or to choose the number you want from the last
10 dialled numbers.
Press
to redial the number.
Phonebook
Storing new phonebook entries (up to 50 entries)
Press . PHONEBOOK is displayed, press .
If entries already stored the rst entry will be displayed, you’ll need to press
again.
Otherwise display shows
ADD ENTRY . Press .
Display shows
ADD NAME . Using the letters on the keypad, enter the name.
You may need to press the same button a few times until the letter you want is
displayed. For example, press 2 once for
A ,or twice for B . Press .
Display shows
ADD NUMBER . Enter the phone number and press to conrm.
Dialling a phonebook entry
Press
. Scroll to the entry you want and press to dial.
Caller Display and the Calls list
You must subscribe to a Caller Display service for this feature to work. Your network
provider may charge you for this service.
View and dial from the Calls list
Press
, then or to scroll through the last 40 incoming calls.
Press
repeatedly to switch between the number and date/time of the call.
Press
to dial entry displayed.
Press
for further options.
Your phone
Handset
Base
B
T
G
r
a
p
h
i
t
e
Help
Most problems can be xed with a few simple checks.
Problem Solution
No dial tone Only use the cables and batteries supplied.
Make sure both the mains power adaptor cable and
telephone line cord are plugged into the correct sockets.
Poor speech quality Make sure the product is not located too close to other
electrical appliances. This can also help improve the
handset range from the base.
Battery icon not full/
handset dead
Make sure you charge the batteries for 24 hours before use
to ensure maximum battery performance.
Using broadband on the same
phone line?
Make sure you plug the phone
into the wall socket via an ADSL
microlter (not supplied), otherwise
you may have problems with this
product and your broadband service.
ADSL
microlter
During playback, skip
back to beginning of
message.
Indicates number
of messages.
Flashes when new
messages are available.
During playback, deletes
current message.
Skip forward during
message playback.
Switches answering
machine between
answer and record,
answer only and off.
Press to stop playback.
Play messages.
Adjust speaker
volume.
Rings other handsets
registered to base.
Answering machine
Your answering machine is on and ready to record messages. The controls are shown in
the base diagram on the bottom left.
Recording your own outgoing message
Press and hold
. After the long beep, speak your message close to the answering
machine base.
Press
to end recording. Your message is played back.
Setting the ring delay
Press and hold
. The current setting is announced.
Press
or to change the ring delay: 2–9 rings or tS (time saver).
Press to conrm.
Now either change your remote access PIN or just wait for the base to return
to standby.
Remote access
Switch on and listen to your messages remotely from another phone.
Switch on answer machine remotely
Dial you phone number, let it ring, after 20 rings your answering machine is
switched on.
Operating answer machine from another phone
Dial your phone number, when you hear the outgoing message press
*
.
Enter your 3-digit PIN (default 000). Any new messages are announced and played.
End a call.
Press and hold
to switch handset
on/off.
Make internal calls.
Make/receive a call
Switch handsfree on/off.
Recall for use
with switchboards
and Call Waiting.
Opens phonebook.
Opens main menu.
Press to select a
menu option.
Mutes your voice
during a call.
Deletes characters.
Exits a menu.
Press and hold to lock/
unlock the keypad.
Opens redial list.
Scroll up.
Increase volume.
Opens Calls list.
Scroll down.
Decrease volume.
Find out more
• New Frequently Asked Questions available at www.bt.com/producthelp
• If you need more detailed instructions, a full user guide is available to
download from www.bt.com/producthelp
• If you cannot nd the answer to your problem in the full online user guide,
then please call our free Helpline on 0808 100 6556
*
. Our dedicated advisors
are more likely to be able to help you than the retailer where you made
your purchase.
• This document is also available in other formats, such as Large print, Braille
and Audio CD. If you would like a copy, please call 0808 100 6556
*
.
9327 Graphite 1500 QSG Iss.3 [3].indd 2 2/4/09 10:38:48