Instruction manual

1070 072 163-101 (97.11) GB
BT5 Menu Description 7-11
7.4.1.1 Display Mask Groups
Each display mask group is composed of four display masks.
Mask Group Masks Mask numbers
Display mask group 1 1: 1/1 thru 1/4 110 thru 113
Display mask group 2 2: 2/1 thru 2/4 120 thru 123
Display mask group 3 3: 3/1 thru 3/4 130 thru 133
Display mask group 4 4: 4/1 thru 4/4 140 thru 143
Fig. 7-12 Mask Numbers of Display Mask Groups
The display masks can be used to display plain-text, system-specific
messages and/or system statuses as reflected by their images in the
controller operands, for example.
Piece count, blue: 1 2 3 4
Piece count, grey: 5 6 7
Piece count, green: 8 9 1 0
Fig. 7-13 Example of Application-specific Display Mask
Using the TS software, and under their respective mask no's, the display
masks must be completed with the required text and desired variables.
The appropriate level / location is reached by using the following se-
quence of menu commands:
Edit /Edit masks /Mask /Select mask /Number of mask.
It may also be necessary to enter a new variable description under Edit
masks /Variable. If new variables are to be used, these must also be de-
clared in the variables file under Edit /Variables file.
Display Contents
The display indicates current status messages (e.g. Outputs Disabled) by
the flashing LED in the [?] key. The messages are displayed in plain text
by pressing the [SCROLL] key.
Menu Control
[HOME] Displays group distribution menu
[CURSOR UP] Previous group display mask
[CURSOR RIGHT] Displays mask at same level of next higher display
group
[CURSOR DOWN] Next display mask of same group
[CURSOR LEFT] Displays mask at same level of next lower display
group