Instruction manual

1070 072 163-101 (97.11) GB
BT5 Menu Description 7-3
7.3 Diagnostic Function
The [print] key is used to display the Cascade Status (mask number 10).
The BT5 operator terminal receives the diagnostic data from the
BTS_Diag diagnostics module (DM254).
This is where the data from the DM120 data module is stored once it has
been processed by the BTSMADAP function module.
7.3.1 Cascade Status
The operator terminal receives the cascade status information from the
BTS_Diag data module.
Cascade Status
BA K/SCH Bezeichn.

A h 1/ 1 Startvor.
As 2/ 1 Endschlt.
Hr 3/ 0 Handbeweg
Fig. 7-3 Cascade Status
The cascade designations (cascade text) are entered in the TS (TesiMod)
software. The appropriate level/location is reached by using the following
sequence of menu commands:
Edit /Masks file / Edit /Edit text lists /Select text list. At the location
reached in this manner, cascade text diagnostics can be entered.
The displayed Cascade Status displays the programmed cascades in
groups of three.
Controller Max. Number of Cascades
CL200 30
CL400 / CL500 60
Fig. 7-4 Maximum Number of Cascades
Display Contents
Cascade status:
•  Cascade faulty
•  Cascade fault-free
OpMode:
• H Manual mode
• T Inching mode
• A Automatic mode
• sStart
• hStop
• r Reset
Cascade number (K) and active step (S)
Cascade text, up to 9 characters in length.