Instruction manual

1070 072 163-101 (97.11) GB
BT5 Menu Description7-2
7.2 Setup Menu
The Setup menu (mask number M1) provides the options to change the
terminal initialization data, and the configuration data for the X2 commu-
nications interface, without the use of a programming device.
SETUP inaktiv
38400B 8D 1S eP noHS
SPS BP19E4.8 LCD <<<
BT5 HF000045 Laden 0
Fig. 7-2 Setup Menu
The Edit mode is toggled On and Off by pressing the [EDIT] key. The
changes are made by means of the [+/-] key.
The cursor movement from one field to the next or back again is con-
trolled by the [CURSOR DOWN] and [CURSOR UP] keys.
A Download sequence is initiated by selecting Load 1 ([+] key), and sub-
sequent confirmation by pressing the [ENTER] key. Once the Flash-
EPROM has been flushed, the operator terminal is again set to Download
mode.
In the event that X2 interface configuration data is modified, each change
requires confirmation by pressing [ENTER]. The transfer of setup data is
effected only subsequent to pressing the [ENTER] key, and switching Off
the Edit mode by pressing the [EDIT] key.