Instruction manual

1070 072 163-101 (97.11) GB
BT5 Menu Description 7-1
7 BT5 Menu Description
Text / Symbol Conventions in Chapter 6
The key symbols used in Chapter 6 appear only once in the section be-
low, opposite their respective text representations. These text representa-
tions will be used throughout this chapter.
For example, the first symbol below, representing Multiple Pages, will be
replaced by the term [SCROLL] in the text hereunder, and the third sym-
bol below, representing an Up Arrow, will be replaced by the term [CUR-
SOR UP] throughout the text, and so forth.
For enhanced clarity, all key symbols will appear in boldface, and en-
closed in square brackets.
[SCROLL] key, status messages
[HOME] key, back one menu level
[CURSOR UP] key
[CURSOR RIGHT] key
[CURSOR DOWN] key
[CURSOR LEFT] key
-> [EDIT] key
-
> [ENTER] key
?[?] key, Help text for current screen
+ / - [+/-] key, toggles entry in Edit mode
print [print] key, Cascade status
7.1 Startup Screen
The Startup screen (mask number M2) appears, subsequent to Power-Up
of the 24 V- power supply, during the initialization phase of the BT5 op-
erator terminal.
A short time thereafter, the Main menu screen (mask number 4) is dis-
played.
Steuern, bedienen,
diagnostizieren,
und anzeigen mit
MADAP vonBosch
Fig. 7-1 Startup Screen
The Startup screen is the only operating element containing an [ENTER]
key. If [ENTER] is pressed within the wait time interval, the Setup screen
is displayed.