Instruction manual

1070 072 163-101 (97.11) GB

CL350 / CL400 / CL500 Control Functions 4-7

4.4.2 Inching Mode / Single Step

Function

Step-by-step processing of steps in accordance with conditions of the

automatic branch.

The command output is enabled when

• the conditions of the automatic branch have been met, (BEFA =

bin

, and WSB = 0

bin

), and

• when the Start (D6.3 ) = 1

bin

The command output occurs via the data bits of data words D80 through

D94 of the associated cascade data module (see cascade data module).

No step-on is enabled.

In the case of a positive transition on S+1 (D6.4), if WSB step-on condi-

tions are met, the step-on to the next step will occur.

Programming

The Inching bit is to be statically set to 1

bin

. Start = 1

bin

causes the current

step to be processed, and a positive transition on S+1 causes the step-on

into the subsequent step.

Diagnostics

Display in cascade information indicates T (indicating incremental ad-

vance by Touch control) for Inching mode at the corresponding cascade

sequence.

Display of all criteria of the automatic branch, either of the non-executed

BEFA or of the WSB branch.

The faulty cascade sequence is displayed.

Monitoring and wait time elapse with the default nominal values.