Instruction manual

1070 072 163-101 (97.11) GB

CL350 / CL400 / CL500 Control Functions4-2

4.2.2 Markers

Within the range of available markers, the markers listed below are as-

signed a permanent function.

Symbol Address Function

CL400/CL500

BEFA M255.0 Assigned to command output.

WSB M255.1 Assigned to step-on function.

STOEM M255.2 Fault marker; fault is indicated by STOEM = 0

bin

HALBAUTO M255.4 Step-on in Inching mode also without S+1 transition.

WZT_HLT M255.5 Wait time stop.

WZT M255.6 Wait time status 0

bin

: Wait time running

bin

: Wait time expired

UEKONTR M255.7 Monitoring time check

If UEKONTR = 1

bin

, expiration of monitoring time will not trigger diagnostic func-

tion.

VERZW M242 Branching address (word)

Step number within the cascade to which branching is to take place if WSB = 1

bin

Fig. 4-1 CL400 / CL500 Control Functions, Marker Definitions