Instruction manual

1070 072 163-101 (97.11) GB
Tesi Mod Software Installation10-6
For the purpose of testing the TS software, the example provided on
diskette should be copied into a project directory. In the following exam-
ple, this is the project SAMPLE1.B00.
COPY A:\CL200\BEISPIEL\BT20\BT20.TSG C:\PG\SAMPLE1.B00\BT20
COPY A:\CL200\BEISPIEL\BT20\BT20_400.PRJ C:\PG\SAMPLE1.B00\BT20
COPY A:\CL200\BEISPIEL\BT20\bt20_4_5.TSM C:\PG\SAMPLE1.B00\BT20
COPY A:\CL200\BEISPIEL\BT20\BT20_400.TSV C:\PG\SAMPLE1.B00\BT20
COPY A:\CL200\BEISPIEL\CL200\*.* C:\PG\SAMPLE1.B00\ZS0
10.5 Concluding Remarks
This concludes the installation of the TesiMod TS Programming System
software, and of the associated data supplied on the BT-MADAP program
diskette.
To start the TS software, the TS command is entered on the command
line of its installation directory. Using the Open Project menu command,
the installed example (the BEISP1 project) can be opened. The masks
contained in this sample project can be edited (refer to the description of
the TS software appearing in Chapter 8 of this manual, "TS Programming
System").