Instruction manual

1070 072 163-101 (97.11) GB
Tesi Mod Software Installation 10-5
CAUTION — Possible Data Loss!
In the event that the required files are already stored in the ...\ZS0
PLC directory or the ...\BT menu tree directory of a given project,
the identical filenames will cause existing files to be overwritten in
the process of copying files from the diskette.
To prevent the loss of essential data, a data backup of existing proj-
ect files is always recommended prior to any new installation proce-
dures.
PLC file destination directory : ...\ZS0
Controller Directory on diskette Files to be copied
CL200 \CL200 all files
CL400 \CL400 all files
CL500 \CL500 all files
Fig. 10-5 Directories of PLC Program Files on BT-MADAP Diskette
Example:
The project named MACHINE1.C00 requires the CL400 controller, and
the BT20 operator terminal is used. The following files must be copied:
BT Controller Diskette directory Files to be copied
20 CL400 \BT20 BT20.TSG
BT20_400.PRJ
BT20_4_5.TSM
BT20_400.TSV
CL400 \CL400 all files
Fig. 10-6 Example of Mask Files for CL400 / BT20 Combination
COPY A:\BT20\BT20.TSG C:\PG\MACHINE1.C00\BT20
COPY A:\BT20\BT20_400.PRJ C:\PG\MACHINE1.C00\BT20
COPY A:\BT20\BT20_4_5.TSM C:\PG\MACHINE1.C00\BT20
COPY A:\BT20\BT20_400.TSV C:\PG\MACHINE1.C00\BT20
COPY A:\CL400\*.* C:\PG\MACHINE1.C00\ZSO
The example provided on the diskette contains menus that were specifi-
cally edited (normally missing text and variables were already inserted),
as well as associated PLC datafiles.
BT Controller Diskette directory Files to be copied
20 \CL200\BEISPIEL\BT20 all files
CL200 \CL200\BEISPIEL\CL200 all files
Fig. 10-7 Example Project for CL200 / BT20 Combination on Diskette