Instruction manual

1070 072 163-101 (97.11) GB
Tesi Mod Software Installation10-4
10.4 BT-MADAP Program Diskette
This diskette contains the menu trees for the BT5 and BT20 operator
terminals, plus the PLC software modules for the CL200, CL400 and
CL500 controller variants.
The menu trees comprise all control menus of the respective operator
terminal, in part without the application-specific text and variables.
Also provided on the diskette is an example suitable for the CL200 con-
troller and BT20 operator terminal. The files are located in the directories
listed below.
\BT20
\BT5
\CL200
\CL200\BEISPIEL\BT20
\CL200\BEISPIEL\CL200
\CL400
\CL500
Fig. 10-3 Directory Structure of BT-MADAP Diskette
Dependent upon the employed controller and operator terminal, different
files must be copied from the various directories belonging to a given
project. In the event that identical data is to be provided to several differ-
ent projects, the respective files must be copied into the subdirectories of
each of the projects in question. (See also CAUTION note at the head of
next page.)
Menu tree destination directory: ...\BT
BT Controller Directory on diskette File to be copied
20 CL200 \BT20 BT20.TSG
BT20_200.PRJ
BT20_200.TSM
BT20_200.TSV
20 CL400 \BT20 BT20.TSG
BT20_400.PRJ
BT20_4_5.TSM
BT20_400.TSV
20 CL500 \BT20 BT20.TSG
BT20_500.PRJ
BT20_4_5.TSM
BT20_500.TSV
5 CL200 \BT5 BT5.TSG
BT5_200.PRJ
BT5_200.TSM
BT5_200.TSV
5 CL400 \BT5 BT5.TSG
BT5_400.PRJ
BT5_4_5.TSM
BT5_400.TSV
5 CL500 \BT5 BT5.TSG
BT5_500.PRJ
BT5_4_5.TSM
BT5_500.TSV
Fig. 10-4 Directories of BT5 / BT20 Project Files on BT-MADAP Diskette