Instruction manual

1070 072 163-101 (97.11) GB
TS Programming System9-16
Mask 20
Power-up Conditions 1 ÓÓÓÓÓÓÓ
← ZE STOP
Hydraulic pump On Ó
← E_HPumpe
Lubrication pump ON Ó
← E_SPumpe
ÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓ
← SysRepOutRepTextP
║ ║ ║ ║║ ║ ║
║
Fig. 9-24 Example of BT20 — Power-Up Conditions Mask
Ó : Placeholder (also: wildcard character) for variable.
9.3.5.3 BT20 – Display Mask
The description of one Display mask (here, M110 - Group 1/1) also ap-
plies to the remaining Display masks.
The display masks are used to indicate several current controller
statuses. A total of 16 Display masks is available.
The contents of Display masks are predefined only to the extent that the
short name of the mask, and the ZENTRALEINHEIT STEHT (ZE STOP)
and SYSREPOUTREPTEXTP (diagnostics message) variables are pro-
vided as default entries. These two variables are present in almost every
mask.
In the example used in the present section, two fixed texts and two vari-
ables are inserted into Display mask number 110.