Instruction manual

1070 072 163-101 (97.11) GB
TS Programming System 9-11
9.3.3.3 Text Lists
Starting from the Edit masks menu bar, the Edit textlists menu com-
mand opens the Edit textlists window.
File Edit Terminal Options
Edit masks
Edit messages
Edit system messages
Edit default help text
Edit textlists
Edit recipes
Function keys
Cursor keys
Fig. 9-15 Edit Textlists Menu
Entering a name causes an available list to be displayed for editing in the
Textlist window. If a text list of this name is not available, the displayed
Textlist window will be blank, and a new text list can be entered. Upon
closing the window, the modifications and/or new entries can be saved or
discarded.
As an alternative, the list of names identifying the available text lists can
be displayed by pressing [F2] (or by selecting the Select textlist menu
command). Pressing [RETURN] causes the text list that is marked to be
displayed for editing in the Textlist window.
The text list contains the allocation of the value of the variable to the text
that is displayed on the operator terminal. The variables values are en-
tered at the left-hand side of the window, and the assigned text sections
at the right. In this process, a blank text segment accompanying the value
of a variable is permissible. The valid variables values are a consequence
of the PLC program.
Cascade no. Text
1 Rotary table
2 Conveyor belt
3etc.
4etc.
Fig. 9-16 Example of Cascade Text Entry
Code Criteria text
1002 E0.2 End position switch, exit hatch
1003 E0.3 Conveyor occupied
1004 etc.
1005 etc.
Fig. 9-17 Example of Criteria Text Entry