Instruction manual

1070 072 163-101 (97.11) GB
TS Programming System 9-3
The menu tree for the CL200 controller contains one modified and one
additional mask.
- EM70 Timer statuses (T)
- EM71 Counter statuses (C)
Fig. 9-3 Timer and Counter Masks — CL200
BT20 Menu Tree
Editing Number Name
- M1 Setup Menu
- M2 Startup mask
- EM4 Main menu
1 EM10 Cascade status
1 EM11 Criteria display
2 EM20 Power-up conditions 1, EM21 thru EM23 -
Power-up conditions 2 thru 4
- EM30 Message parameters
1 MM31 Status messages
- MM33 Serial messages
- EM50 Service menu
- EM51 Clock / internal messages
- EM60 Statuses (binary)
- EM61 Statuses (hexadecimal)
- EM70 T and C statuses
- EM80 Statuses DM/DF,DB (hexadecimal)
- EM81 Statuses DM/DF,DB (binary)
- EM90 Statuses DM/DF,DB (hexadecimal)
- EM91 Statuses DM/DF,DB (binary)
- EM100 Display menu
2 EM110 Display mask Group 1/1
EM111 - EM113 - Group 1/2-1/4
EM120 - EM123 - Group 1/2-1/4
EM130 - EM133 - Group 1/2-1/4
EM140 - EM143 - Group 1/2-1/4
- EM200 Operation menu
1 EM211 Operation mask Group 1/1
EM212 - EM214 - Group 1/2-1/4
EM215 - EM218 - Group 1/2-1/4
EM219 - EM222 - Group 1/2-1/4
EM223 - EM226 - Group 1/2-1/4
The menu tree for the CL200 controller contains one modified and one
additional mask.
- EM70 Timer statuses (T)
- EM71 Counter statuses (C)
Fig. 9-4 Mask Table — BT20 Operator Terminal; T and C Masks — CL200
Editing = - → No editing required.
= 1
→ Text must be inserted.
= 2
→ Text and variables must be inserted.