Instruction manual

1070 072 163-101 (97.11) GB
BT20 Menu Descriptions 8-27
[EDIT] Toggles Edit mode On/Off. With Edit mode en-
abled, editing is possible only in the selected
mask.
[1], [2], [3] ... Enter desired operand address.
[ENTER] Accepts/adopts entered operand address, or
transfers default of 0/1
bin
status to desired con-
troller mask.
CAUTION!
Pressing the [ENTER] key one more time will cause the control mask
to the written into the PLC!
Prerequisite:
The Control function is initially disabled. It is en-
abled by entering the value of 1
hex
in data word
D448 of data module DM255.