Instruction manual

1070 072 163-101 (97.11) GB
BT20 Menu Descriptions 8-23
Display Contents
The display indicates current status messages (e.g. Outputs Disabled) via
the flashing LED in the [MELD] key. The messages appear in the display
line for status messages. Additional messages can be displayed in plain-
text form by pressing the [MELD] function key.
Menu Control
[F3] Switches statuses between inputs ->, outputs -
>, markers ->, inputs.
[CURSOR RIGHT] or
[CURSOR LEFT] Switches between inputs -> extended input,
and/or outputs -> extended output.
[F7] Status T, C (in the case of the CL200, times
and counters are displayed in two separate
masks).
[F8] Operand status DF, (DB).
[F9] Operand status, DM
[EDIT] Toggles Edit mode On/Off. With Edit mode en-
abled, editing is possible only in the selected
mask.
[1], [2], [3] ... Enter desired operand address.
[ENTER] Accepts/adopts entered operand address, or
transfers default of 0/1
bin
status to desired con-
troller mask.
CAUTION!
Pressing the [ENTER] key one more time will cause the control mask
to the written into the PLC!
Prerequisite:
The Control function is initially disabled. It is en-
abled by entering the value of 1
hex
in data word
D448 of data module DM255.