Instruction manual

1070 072 163-101 (97.11) GB
BT20 Menu Description8-16
8.4.3 Message Menu
Pressing [F3] in the Main menu opens the Message menu.
In the display of the BT operator terminal, the user can access status
messages (mask number 31), plus serial messages (mask number 33)
and their respective parameterization (mask number 30).
8.4.3.1 Status Messages
Status messages comprise not only default messages but also additional
user-defined messages.
Zustandsmeldungen
Diagnose steht an!
Batterievorwarnung!
Fig. 8-15 Example of Status Messages
Display Contents
The display indicates status messages. The ZE STOP message cannot
be displayed at this location.
Menu Control
[F2] Serial messages
[F3] Message parameters
Using the TS (TesiMod) software, and starting with message no. 17, user-
defined system-specific status messages must be manually entered in
text form. The appropriate level / location is reached using the following
sequence of menu commands:
Edit /Messages. These messages are enabled by entries in DM255, be-
ginning with data word DW462.
Example: Message no. 18 (second free user message) is to be displayed.
The PLC program must write the contents of 0002
hex
into data word
DW462.