Instruction manual

1070 072 163-101 (97.11) GB
BT20 Menu Description8-14
8.4.2.1 Operation Mask Groups
Pressing function keys [F1] through [F3], and [F7] causes the operation
mask groups to be displayed. Each operation mask group is composed of
four operation masks.
Each operation mask provides for the operation of 4 x 2 movements.
Mask group
Masks
Mask num-
ber
Operation mask group 1 1: 1/1 thru 1/4 211 thru 213
Operation mask group 2 2: 2/1 thru 2/4 215 thru 218
Operation mask group 3 3: 3/1 thru 3/4 219 thru 222
Operation mask group 4 4: 4/1 thru 4/4 223 thru 226
Fig. 8-13 Mask Numbers of Operation Mask Groups
For each movement, the display indicates the end position bit (limit
switch) and the active bit (output). (The 1
bin
status is represented by a
black rectangle.)
Hand 1/1
ZE STOP
>>
Zylinder 1
<<
hinten zurück vor vorn
>>
Zylinder 2
<<
hinten zurück vor vorn
>> <<
>>
Motor
<<
aus ein
>Zeile für Z u s t a n d s m e l d u n g e n

↓

↑


Fig. 8-14 Example of Application-specific Operation Mask
Using the TS (TesiMod) software, and under their respective mask num-
bers, the operation masks must be completed with the required text en-
tries. The appropriate level / location is reached by using the following
sequence of menu commands:
Edit /Masks file / Edit /Mask.
The addresses of the variables for end position and active bit display are
predefined by default (upward of marker M180), and are serviced by the
BTS_ZV function module.