Instruction manual

1070 072 163-101 (97.11) GB
BT20 Menu Descriptions 8-9
8.4 BT20 Main Menu
The Main menu (mask number 4) is the first screen to be statically dis-
played after switching on the operator terminal. From this point, branching
to the various functions of the operator terminal takes place.
Basismenü
ZE STOP
> Anz < Anzeigen
> Bed < Bedienen
> Meld < Meldungen
> EBed < Einschaltbedingungen
> Serv < Service
> LT < Lampentest
>Zeile für Zustandsmeldung
e
en

Anz

Bed

Meld

EBed

Ser v

LT

Fig. 8-8 Main Menu
The function keys of the Main menu are used to access all other menus.
The [F9] function key provides a lamp test. Pressing [F9] causes the LT
7
marker (M179.7) to be set, and the marker is again reset upon releasing
[F9].
Display Contents
The display indicates current status messages (e.g. Outputs Disabled) via
the flashing LED in the [MELD] key. The messages appear in the display
line for status messages. Additional messages can be displayed in plain-
text form by pressing the [MELD] function key.
Menu Control
[F1] Switches to Display menu
[F2] Switches to Operating menu
[F3] Switches to Message menu
[F7] Power-up conditions
[F8] Switches to Service menu
[F9] Selects Lamp test
7
See <name>.TSV variables file