Instruction manual

1070 072 163-101 (97.11) GB
BT20 Menu Descriptions 8-5
OpMode:
• H Manual mode
• T Inching mode
• A Automatic mode
• sStart
• hStop
• r Reset
Cascade number (K) and active step (S)
Cascade text, up to 26 characters in length.
Menu Control
[F1] Page Down (display next cascade group)
[F2] Page Up (display previous cascade group)
8.3.2 Criteria Analysis
While in Cascade Status, pressing the [DIAG] key accesses the Criteria
Analysis (mask number 11). The Criteria Analysis displays the first-value
error or the current step.
Diagnose Kette 1 Schritt 1 ZE STOP
Betr.Art: AUTO 16.06.95 9:45:15
Krit.Anz: 4 gestört!
UN E 14.2 Zylinder Z2 nicht vorne
UN E 14.4 Zylinder Z3 nicht vorne

UN A 20.6 Schutzvorrichtung offen

= M 255.1 WSB Weiterschaltbedingung
> Zeile für Statusmeldungen

↓

↑

HandD

Fig. 8-4 Criteria Analysis
For the Criteria Analysis, 2 pages with 9 criteria are available. This means
that, in the case of branches containing more than 18 criteria, further
linking of either the BEFA command output or WSB step-on condition
marker will be required.
Designations for inputs and markers (criteria text) must be entered in the
TS (TesiMod) software. The appropriate level / location is reached by us-
ing the following sequence of menu commands:
Edit /Masks file / Edit /Edit text lists /Select text list.
At the location thus reached, and building on a base code, criteria text di-
agnostics can then be entered in the form of decimal values.