Instruction manual

1070 072 163-101 (97.11) GB
BT20 Menu Description8-4
8.3 Diagnostic Function
Pressing the [DIAG] key displays the cascade status (DIAGNOSE, mask
number 10). The BT20 operator terminal receives the diagnostic data
from the BTS_Diag diagnostics module (DM254).
This is where the data from the DM120 data module is stored once it has
been processed by the BTSMADAP function module.
8.3.1 Cascade Status
The operator terminal receives the cascade status information from the
BTS_Diag data module.
Kettenstatus ZE STOP
BA K/Sch Bezeichnung
A h 1/ 1 Grundstartvoraussetzungen
A s 2/ 1 Endschalterpaarüberwachung
H r 3/ 0 Handbewegungen
T s 4/ 2 Zylindermodell
>Zeile für Statusmeldungen

↓

↑

Fig. 8-3 Cascade Status
Selecting the cascade status causes the programmed cascade se-
quences to be displayed. The display encompasses up to 60 cascades for
the CL400 / CL500, and up to 30 cascades for the CL200.
The cascade designations (cascade text) are entered in the TS (TesiMod)
software. The appropriate level/location is reached by using the following
sequence of menu commands:
Edit /Masks file / Edit /Edit text lists /Select text list. At the location
reached in this manner, cascade text diagnostics can be entered.
Display Contents
The display indicates current status messages (e.g. Outputs Disabled) via
the flashing LED in the [MELD] key. The messages appear in the display
line for status messages. Additional messages can be displayed in plain-
text form by pressing the [MELD] function key.
Cascade status:
• Cascade faulty
•  Cascade fault-free