Instruction manual

1070 072 163-101 (97.11) GB
BT5 Menu Description7-22
7.5.4 Internal Messages
Pressing the [F3] key in the Service menu causes the display of internal
PLC messages (mask number 2) (e.g. current / maximum cycle time).
akt.Zykl.Zeit: 3ms
max.Zykl.Zeit: 5ms
W at ch Dog : 200ms
Fig. 7-25 Example of Internal Messages
Display Contents
The display indicates current status messages (e.g. Outputs Disabled) via
the flashing LED in the [?] key. The messages are displayed in plain text
by pressing the [SCROLL] key.
The Battery Fault, Fixation and Output Enabled messages are also dis-
played directly in the mask.
Menu Control
[HOME] Service menu
[CURSOR LEFT]
[CURSOR RIGHT] Date and time
7.5.5 Date / Time
Da t u m u n d Uh r z e i t
Frei t ag
16. 06 . 95 10: 45: 15
Fig. 7-26 Date and Time
Menu Control
[CURSOR LEFT] or
[CURSOR RIGHT] Internal messages
[EDIT] Edit mode: Toggles weekday, date and time
On/Off. With Edit mode enabled, the [HOME]
key is disabled.
[- / +] Selects weekday
[ENTER] Accepts/confirms entries. Data and time set-
tings by means of numerical keys. [ENTER] key
to accept/confirm, and step-on to next entry.