Instruction manual

1070 072 163-101 (97.11) GB
BT5 Menu Description7-18
7.5 Service Menu
Using the [CURSOR RIGHT] and [CURSOR LEFT] keys in the Main
menu opens the Service menu (mask number 5).
The Service menu displays the Power-Up conditions, status indications of
several controller-specific operands, date and time of the BT (both
changeable), and internal messages.
S E R V I C E B a s i s ->
> F1 < E i n s c h a l t b e d .
> F2 < O P D - S t a t u s
> F3 < U h r / i n t . M e l d .
Fig. 7-20 Service Menu
Display Contents
The display indicates current status messages (e.g. Outputs Disabled) via
the flashing LED in the [?] key. The messages are displayed in plain text
by pressing the [SCROLL] key.
Menu Control
[F1] Power-Up conditions
[F2] Operand status
[F3] Clock / internal messages
[F6] PG programming device communication mask
[HOME] Main menu
[CURSOR LEFT] or
[CURSOR RIGHT] Main menu
7.5.1 PG Communication Mask
Pressing [F6] in the Service mask starts the communication with the PG
programming device. During this process, the data interchange between
the PLC and the BT operator terminal is disabled, and is routed (looped)
via appropriate cables to the interface of the PG programming device.
This looped connection may be used to load PLC programs, for example.
Ko mmu n i k a t i o n
mi t P G
ist aktiv!
Ausschalten mit >F6
Fig. 7-21 Communications with PG Programming Device
Menu Control
[F6] Toggles communication with PG programming device ON/Off