Instruction manual

1070 072 163-101 (97.11) GB
BT5 Menu Description7-16
• Once the message number has been transferred tom the BT op-
erator terminal, the BT will write the value of 0
hex
into the data word,
and the PLC program can send a new message.
Ser i el l e Mel dungen
>Di agnose st eht an
Fig. 7-18 Example of Serial Messages
Display Contents
The display indicates current status messages (e.g. Outputs Disabled) via
the flashing LED in the [?] key. The messages are displayed in plain text
by pressing the [SCROLL] key.
Menu Control
[F1] Status messages
[F3] Message parameters
[HOME] Returns to Main menu
7.4.3.3 Message Parameters
In the Message Parameters mask, the parallel messages (status mes-
sages) and serial messages are provided with the following parameters:
• On/Off
• Date On/Off
• Time On/Off
• Sort criteria Number <-> Time point
Mel dungs par amet er
>Nr.DatUhrSort
pa r aus aus aus Nr .
ser aus aus aus Zei t
Fig. 7-19 Example of Message Parameters
Display Contents
The display indicates current status messages (e.g. Outputs Disabled) via
the flashing LED in the [?] key. The messages are displayed in plain text
by pressing the [SCROLL] key or the [F1] function key.