Operation Manual

Diverse 3010 Executive – Edition 4 – 22 November ’00 - 3509
36
Using the Room Monitor
If you have at least two handsets
registered to your base station, you can
leave one handset in a room in order to
monitor the noise level.
The handset you leave in the room is
noise activated and you can adjust its
level of sensitivity to the noise. If the
noise reaches the level you have set,
the monitoring handset will call your
handset so you can hear what’s going
on. When you hang up your handset,
the handset in the room will continue
monitoring the noise.
Open listening at the
handset
De-activating open listening:
Press the LSTN.OFF button.
The external connection is not
affected.
To enable another handset to
‘listen in’ on your conversation
If you want another person to
hear your call, you can let them
listen in on another handset
registered to the same base
station.
During a call with an external
user:
Press the
INT button. The call
is placed on hold.
Enter the call number of the
other handset e.g.
2 – the
otherhandset rings, the other
internal user press the GREEN
PHONE button.
Press the
LSTN.ON button. You
are reconnected to the external
user. The other internal user
can hear the conversation.
Note
When in Open Listening the extra
handsets can only hear the external
caller.
Note
The internal user can elect to
terminate open listening by pressing
the RED PHONE button.
INT
KEYPAD
LSTN.ON
LSTN.OFF
To set the room monitor
Press the MENU button.
Press the
DOWN arrow to
highlight Room Monitor Set .
Press the
OK button.
Press the
DOWN arrow to
highlight Room Monitor No .
Press the
OK button.
Enter the
1-6 number of the
handset to be called.
Press the
OK button. You can
now place the handset in the
room you want to monitor.
1- 6
OK
OK
OK
ADDITONAL FEATURES
Diverse 3010 Executive 22/3/01 12:03 pm Page 36