Operation Manual

24
If you are experiencing any difficulties,
please call the Diverse Helpline on
0345 908070.
If the memory location is empty, the
display shows
—
—
—
. If there is another
number stored already, that number
will be displayed. If you do not want
to change it, press the
STO button to
confirm the number.
To speed dial a number stored on the
memory
The handset must be switched ON.
• Press and release the
MEM button
two or three times.
• Press
MEM and then the memory
location number on the keypad.
Then
• Press the
PHONE button to dial the
number you want.
To clear all the numbers stored on a
handset’s memory
• Press the STO button.
• Press
8 and then 2 on the keypad.
Display shows
8----2.
• Enter the handset’s PIN number
(standard setting 0000). Each digit
entered erases one dash on the display.
• Press the
STO button. All stored
numbers are cleared.
MEM
STO
8
TUV
2
ABC