Operation Manual

To reset your Diverse 1010 base unit to
the original factory settings
This will reset:
TONE/PULSE signalling to TONE
Access code/pause to NONE
Pause after the RCL key to NONE
Ring assignment to collective ringing.
It will also delete any new settings made for:
Connections to a switchboard.
This will NOT reset:
the system code
handset registration settings.
The handset must be switched ON
• Press the STO button.
• Press the # button.
• Press the 1 button.
• Enter the system code. (Factory setting 0000.)
• Press the LNR button.
• Enter the code 2 5 0.
• Press the STO button to confirm.
13
To adjust the ‘range warning’ tone
If you are on a call as you reach the limit of
your handset’s range, you will hear a tone to
warn you that you will lose the call if you move
further away. You can turn this sound on and
off. The factory setting is ON.
• Press the STO button.
• Press 3 then 3 again. Display shows the
current setting
I = ON, O = OFF.
• Press 1 to switch the tone ON
or
• Press 0 to switch the tone OFF.
• Press the STO button to confirm the new
setting.
To adjust the ‘in-range’ tone
If you have taken the handset outside the
phone’s range – provided the handset is
switched on – you will hear a tone when you
come back within range. You can turn this
sound on and off. The factory setting is ON.
• Press the STO button.
• Press 3 then 5. Display shows the current
setting
I = ON, O = OFF.
• Press 1 to switch the tone ON
or
• Press 0 to switch the tone OFF.
• Press the STO button to confirm the new
setting.
STO
3
DEF
3
DEF
STO
3
DEF
5
JKL
Setting up