Installation manual

Table 38 - User Authorisation Settings

Each of the 16 User Codes may be assigned authorisation for Local

Disarm, Local Arm, Remote Disarm, Remote Arm, Disarm on Alarm

only, Security Menu (User Menu 3) Access, Home Control Menu (User

Menu 4) Access, and Program Authorisation. These User authorisations

settings can also be programmed in the CS-Xpress software.

When assigning Control Station Function Keys (next section) ,each of

the above access privileges may be applied to the Response on each

Function key. This involves the use of action code ‘99’ followed by the

cumulative weights shown in Table 38. which set the type of

authorisation level allowed to enter certain menu types or perform

arm/disarm functions.

(( In UL and BS4737 Installations, Remote Arm & Disarm should

be disabled.

Table 39 - Control Station Menu (Eng Menu 4,4)

Each of the 16 Keypad function keys (F + keys) can be assigned a

Response. Each Function key is assigned to a default Response as

shown in the table. Keypad Responses can be shortcuts to selected

sub-menus, or control appliances or a perform a series of actions, as

determined by the assigned Response.

Only the keys 0 to 9 and * can be programmed from the Control

Station Menu. The Away, Night, Day, # and F keys are programmed

using Locations because the voice menu system can only select 0 to 9

or *.

The 3 one-touch keys Away, Night, Day do not need the F key to

activate the programmed functions, unlike the other keys.

Action Codes for Keypads

The following Action codes are specially useful for Keypad

programming. Full descriptions of the actions are in the booklet

“Programming with Action Codes”

Action 22 - Intercom Request

Activate Intercom Mode. The function Key puts the Keypad in Intercom

Mode, broadcasting to all other Keypads until a key is pressed on

another Keypad. The two Keypads are then in two way intercom

conversation state

Action 91 - Go To Voice Menu

Usage : 91, menu_number

The Function Key activates the selected Voice Menu. See Programming

with Action codes for the list of Menus available. This allows Function

Keys to act as short cuts to the most useful menus without having to go

through the main menu.

Comfort Installation Manual