Installation manual

There are 16 Time Programs which can perform regular functions

automatically at pre-programmed times.

Each Time Program consists of an activation time, which day/s of the

week for the activation, and a custom Response. A Time Program can

be specified to run regularly for any combination of days of the week

(Monday to Sunday) or just to occur during a specified Holiday and

whenever Holiday Mode is set. A Time Program is activated if the

current day of week and the time matches the programmed day and

time (to the minute). When this happens, the programmed Response

will occur.

There are three ways in which a Time Program event can occur:

1 on specified days every week except during Holidays and Holiday Mode

(ie. Heating). *Response needed to prevent occurrence during

Holidays.

2 only on Holidays and during Holiday Mode (ie sprinklers).

3 on specified days every week of the year (ie. DST and CMS Test).

Time Programs can be used to perform the automatic Daylight Saving

Time Adjustments to the clock (see Daylight Saving in Training Manual).

16 Time Programs are available which can be activated at any time of

day and for any combination of days of the week and holidays. These

Time Programs can be used to turn appliances and lights on or off and

for arming and disarming the security system.

If a Time Program Day of week is ON for Holidays, it will be active on

any of the defined Holidays. Applications for this are when things should

happen at a different time from normal days, for example when a shop

opens later or closes earlier.

* Some Time Programs do not need to know when it is a Holiday, i.e.,

they should happen regardless of whether the day is a holiday.

However, for some Time Programs, it is essential that the programed

actions should not occur on holidays, such as automatic unlocking of

certain gates or automatic disarm for commercial premises or switching

the heating. In such cases, the Time Program Response which is

activated at the programmed time should check if the day is a holiday,

by using Action 73,19 (Get Holiday) and 13 (Exit if ON) before

performing the rest of the Actions..

(( Switching a device ON and then Off at a later time requires two

Time Programs.

Table 29 - Holiday Program (Engineer Menu 3,4)

8 Holiday programs are available to randomly turn on and off

appliances and lights during Holiday Mode. Refer to the Engineer Menu

for full details of this programming.

Table 30 - Security Mode Response (Eng Menu 3,5)

When the system is armed to each of the Security Mode, Home, Away,

Night, or Day, an optional Response or program can be activated. For

Comfort Installation Manual