Installation manual

When the correct code has been entered, the system enters the

Engineer Menu.

To Select a sub-menu or option from the voice menu, enter a number

on the telephone keypad as instructed (digits 0-9,*,#). It is not

necessary to wait until the voice menu is completed before entering the

digit to select a sub-menu or option.

How to use the Voice Menus

The general sequence of the voice menus (User, Program, Engineer) is:

1 The Voice Menu gives the options or sub-menus which can be selected.

2 The system waits for entry of a number key from the keypad. If no

number key is pressed within a time limit, the menu is replayed. If no

keys are pressed for some time, the system exits this mode and

returns the phone to normal operation or turns off the Keypad.

3 When the number key is pressed either (a) the selected menu item is

activated, (b) a new sub-menu is selected with a new voice menu or

setting. In the case of (c), when a new number is to be entered, the

system will say the current value of the parameter, and ask for a new

number and # key. After the number is entered followed by the # key,

the new value entered will be announced as confirmation. If the current

value is not to be changed, just enter #. The previous voice menu will

be played. Entering * clears the digits entered, for example

1234*5678# will enter 5678.

(( When using the telephone, to avoid mistakes when entering

numbers during programming, press * before the number. This

stops the voice menu and clears any numbers entered. If the

voice menu is talking, make sure that it stops when the key is

pressed. This is useful if you do not wait for the menu to finish

before keying in the new number.

4 At any voice menu, entering just # alone will return to the previous

menu.

5 Pressing F on the active Keypad ends the menu.

6 If an invalid digit is entered in response to a voice menu, the menu will

be repeated. Hence to repeat a menu (if you do not want to wait a

while) , just press an invalid digit; usually 0 or 9 will do.

7 When asking for input, the voice menu will say "Press .. for.." or

"Enter new ... number (or code) and # key". In the first case, you only

press a number key without the # key, to make a selection from

among the options given. In the second case, more than 1 digit is

pressed, followed by the # key, to enter a number.

8 When pressing keys on the telephone, press firmly and release

normally without keeping your finger on the button. When

entering a number and hex key during programming, all keys pressed

will be confirmed by a short beep tone.

Comfort Installation Manual