Installation manual

which are found after entering the Engineer Code and shows the

Flowchart for overall view

Keypad/ Door Station Installation Manual

This leaflet show how to connect and install the Keypad and Door

Stations to the Comfort control panel. The information is also found in

this manual.

Programming Worksheet

The worksheets are the place where you write down your customer

configuration and programming settings. We strongly recommend that

you do not attempt to install a system without using this worksheet as

it will make your programming much easier, and prevent you from

missing any settings. A detailed record of how each system is

configured is crucial for proper management. Also, keep it updated as

any future changes take place. If used properly it may ‘save your life’,

more than once.

Programming With Action Codes.

You can get the system up and running on the default settings, but its

likely you will want to do some of the clever things which attracted you

to Comfort in the first place. You will need a good grasp of Action Codes

and how they are used in Response.

Action codes are Comfort’s powerful customisation commands. These

are assembled into Responses (sometimes called “Macros”) to produce

multiple operations. They can be found in Table 33. Master these and

you can make your Comfort system do what no other system can. If

overwriting an existing Response, always check first that the Response

is not already being used by the system.

Defaults Manual

We try to provide a useful starting point for your Comfort Configuration,

this is called the default.cst file and is detailed in the Default Manual

Guide.

Applications Manual

The applications manual is a more in-depth guide to using action codes

and responses for use in customising a system. Many of the

applications are not found in the default setup and must be entered into

the responses menu using the manual method via Engineer Menu 3,6 or

using CS-Xpress. This is updated constantly as new applications and

solutions are written. The Applications manual is is available On-line at:

www.comfort.org.uk/technical (password protected). You can apply for

a password at this address: www.comfort.org.uk/index4.html.

Comfort Installation Manual