Installation manual

w BT1270 - Battery 12V 7AH (Sealed Lead-Acid)
w TB02 - 2 way Terminal Blocks
w TB03 - 3 way Terminal Blocks
w Model LEM01 - Local Expansion Module 8+8 (8 zones, 8 outputs)
w EOL4.7K - 4.7K End-Of-Line insulated resistors
w EOL2.7K - 2.7K End-Of-Line insulated Resistors
Items below have not been evaluated by Underwriters Laboratories:
w KP01 - Keypad
w KP02 - Keypad with Infrared Receiver (Comfort specific codes only)
w DP01 - Polycarbonate Door Station
w DP02 - Metal Door Station, flush mount or surface mount options
w DM01 - Comfort Demonstration Briefcase
w Model LEM02 - Local Expansion Module 8+0 (8 zones, 0 outputs)
w Model LEM03 - Local Expansion Module 16+0 (16 zones, 0 outputs)
w Infrared LEDs Kit (Infrared LED + 100 ohms 1W resistor)
w 12 V lamps
w Model RLY01 Relay Module (4 relays)
w Model CSM01 Current Sensor Module
w Model LSM01 Light Sensor Module
w Model ZTS01 Zone Test Switch
w Model UCM01 RS232 Interface Module for PC communication
w Model RGR01 Ringer Module
w Model SEP02 Slave Expansion Panel
w CS-Xpress for Windows 95/98/NT/W2000
Year 2000 Compliance Statement
Comfort is Year 2000 (Y2K) compliant, and has been so since the
product was first introduced. The system works correctly for all dates
up to 9999.
What do I read first?
We have found that placing all the information in one book makes it too
thick and means that you end up with three thumbs in various sections
of the book at once, so we felt it was easier if the relevant information
was spread across a few booklets for better organisation.
Manuals for Installers
Comfort Installation Manual
This manual describes the installation methods along with some basic
grounding on the Comfort Concept, also lists the voice menu options
Comfort Installation Manual
13