Installation manual

System (7)
Press 1 for Pulse Dial Option
2 for PABX option
4 for Star Menu
Pulse Dial Option (7,1)
Pulse Dial Option OFF
Press 1 for ON, 0 for OFF
If this option is set to ON, the system will use pulse dialing to dial out.
However, a tone dialing phone is necessary to activate the voice
menus.
PABX option (7,2)
PABX Option OFF,
Press 1 for ON, 0 for OFF
If the system is to be connected behind a PABX, i.e. it is connected as
one of the extensions of an analog PABX, set this option to 1.
Warning: If the Comfort system is connected as one of the extensions
of a PABX, it will not be able to detect a telephone line cut condition on
the incoming telephone line, and may not be able to seize the telephone
line to dial out in case of an alarm if all the outside lines are used by
other extensions.
(( Do not connect the system to an extension of a PABX for UL
installations.
PABX Key (7,2,1)
PABX Key, 9, Enter PABX key
Enter the number (0-9, *) you use to access an outside line on your
PABX. This is usually 9 or 0 in most systems.
(( Comfort handles the dialout through the PABX intelligently. If
there is a power failure, Comfort will not dial the PABX access
key to get an outside line. If the Comfort system is connected
to an extension of a PABX, the extension should be one which
has direct access to the telephone line in the event of a power
failure. The PABX should be on the same power circuit as the
Comfort system.
Comfort Installation Manual
128