Installation manual

CS-Xpress can be used to upload the panel log via a local connection
using the RS232 interface module. This can then be printed from the
PC running the CS-Xpress software.
Erase Event Log (5,0)
If this option is selected, the event log will be erased. This is only
available on the Engineer Menu. The user menu allows the Event Log to
be heard, but not erased
Change Sign-in Code (6)
Enter new code and # key
The system will not allow a sign-in code which is the same as another
existing sign-in code or a sign-in code +/1 which is a duress code, in
which case the voice menu will say
Invalid
A 4-digit to 6-digit number may be entered. When the new number is
entered, the system will ask for confirmation
To confirm, enter new code and # key
If the number corresponds with the 1st number entered, the voice
menu will say
Sign-in code OK
If the 2nd code entered is not the same as the 1st number entered, the
1st number will be discarded, and the 2nd number will be saved for
comparison, and the system will ask to confirm the sign-in code again.
Sign-in codes ending with 0000 and 9999 are not allowed.
Comfort Installation Manual
127