Installation manual

Enter the new communication format 1 to 16, (see Communicator
Formats - Table 10, Programming Tables) for the communication format
numbers) or just # to leave the current format unchanged.
Monitoring Station - Change Phone Number (4,1,4,3)
The voice menu will say the current Monitoring Station phone number
e.g.,
8725742
Enter new number and # key
Enter the new phone number for the Monitoring Station and #, or just
# to leave the number unchanged.
Monitoring Station Voice Station Option (4,1,4,4)
This option determines whether the 2 way voice feature is enabled after
a report to the Central Monitoring Station.
Monitoring Station Voice Station OFF,
Press 1 for ON, 0 for OFF
Enter 1 to enable and 0 to disable, or # to leave the setting unchanged.
When this setting is selected, the CMS operator is able to pick up the
phone after the digital communicator transmission has ended and to
activate the Voice station in 2 way mode.
(( Dialout Grouping: The 8 phone numbers are divided into 2 dial
out groups. These are phones 1 and 2 in the first (monitoring
station group) and phones 3 to 8 (normal phones group). In
the normal phones group, a valid sign-in from a Voice Station
will stop further dial outs in that group. In the Monitoring
Stations group, a kissoff from a Monitoring Station or a valid
sign-in from a Voice Phone will stop further dial outs in the
group. Acknowledged dial outs to pagers and Alarm Voice
Message Phone types do not stop dial outs to other phones, but
end dial outs only to that particular number. The sequence of
dial outs is from phone 1 to 8. If a dial out is not acknowledged
or if the called number is busy or does not answer, the system
dials to the next number in the list, and returns to the failed
number in the next cycle.
(( There is a programmable delay of default 3 minutes after a
kissoff from a Monitoring Station in an alarm state before the
other phone numbers are dialled, to allow time for the Central
Station to call the premises to verify the alarm. This delay in
minutes is in Location 1687.
(( Once phone 1 or 2 is set to a Monitoring Station, the user will
not be able to change the phone setting to other phone types
or make any other changes to the programmed phone in the
Program Menu.
Comfort Installation Manual
121