Installation manual

Security (4)
Press 1 for Phone Settings
2 for Entry/exit Time
3 for Security Options
4 for Control Station
Phone Settings (4,1)
Select Phone
Press 1 to 8 (without # key) to select the phone index.
Phone settings 1 and 2 may be assigned to Monitoring Stations, or to
other phone types. Phone settings 3 to 8 may be assigned to Voice
Phone, pager or Alarm Voice Message.
The primary or main Monitoring Station is assigned to Phone Setting 1,
and the second or backup Monitoring Station is assigned to Phone
Setting 2. The system will only dial to the second Monitoring Station if it
fails to get connected to or receive a kiss-off from the first Monitoring
Station.
The voice menu says the current setting of the selected phone index,
e.g.
Pager 92117893
Press 0 for No Phone
1 for Voice Phone
2 for Pager
3 for Alarm Message
4 for Monitoring Station
Voice Phone refers to any telephone or cellular phone, where a voice
message will be played, and the user can sign in to access the system.
The Pager Phone Type displays the 4 digit Pager ID code, the alarm
type and zone or user number on the pager. See the Quick Reference
Guide for a list of pager codes for each Alarm type
The Alarm Message Phone Type gives a prerecorded message as well as
announcing the Alarm Type, and does not permit sign-in to access the
system.
Set the unused dial settings to phone type 0.
If 1 (voice phone) or 2 (pager) is selected, the voice menu says
Comfort Installation Manual
119