Installation manual

Enter the new word number and # key. Enter the next word in the
same way. A Maximum of 3 words is allowed. If there are less than 3
words, enter 255 as the terminator.
Control Action Response (3,1,2,2)
Response 12 - enter Response number and # key
Enter new response number 1 to 99#, or just # to leave response
unchanged. Enter 0 if no response is required.
From the Engineer menu, press 3 - Control Settings, 1 - Output
Settings. The Voice menu says:
Enter Control Key
Control Keys are the numbers on the phone keypad which select the
appliance or group of appliances, for example
Press 1 for Light, 2 for Heater..
1 and 2 etc.. are the Control Keys.
Example
Determine which control keys on the phone keypad from 0 to 9 and *
are to be assigned to home appliances or lights. The phone keys are
programmed in 2 levels. The first level assigns the appliances to each
key, the 2nd level for each appliance or light assigns actions to each
key (e.g. off, on, open, close). Select the Control Key for the appliance
to be controlled. Then select the Output Description and enter up to 4
words for the device (light or appliance). Determine the Actions which
are to be performed for this device and for each action, assign up to 3
words (e.g. ON, OFF, HIGH LEVEL, LOW LEVEL etc..) and assign a
Response number which is to perform the required Action. Repeat for
each action key,. Do the same for each Control Key to be
programmed..
As an example, we shall program the following Home Control Menu:
Press 1 for Bedroom Light
2 for Garage Gate
with bedroom light connected to X10 house code A, unit code 1, and
Gate control connected to output 1 and 2, where a pulse on Output 1
opens the gate and a pulse on Output 2 closes the gate.
In the Control Menu, press 1 for Control Key 1. The Voice Menu says
Comfort Installation Manual
111